Checkweigher System, Optiweigh, Model IW 3000 is primarily used for weighing and segregating the packs for low or high weight, during packing.
The checkweigher is easy to integrate in any existing line and occupies less space.
The system consists of Inlet, Weighing and Exit conveyor. The exit conveyor has a suitable rejection mechanism, that works on pneumatic supply.
Typically this system is useful in Food, FMCG & Pharmaceutical sectors.
» Technical Specifications
Note:
(a) (*) Depends on pack dimension, product's nature, speed, field conditions, transportation behaviour of the product etc.,
(b)Due to continuous development in the product, the specifications stated above subject to change without prior notice.
(c) (**) System length can change depending on the rejection device selected.
| Optiweigh | IW 3000 |
| weighing range | 20-3000 g |
| Throughput | upto 80 Packs/min. Pack size dependant |
| Accuracy * | ± 1.0 g |
| Product Length | 60 - 350 mm |
| Product Width | 20 - 250 mm |
| Product Height | 10 - 180 mm |
| Belt Speed | upto 45mtrs/min |
| Operating Height | 750 + 100 mm |
| System Length ** | 1250 mm |
| Interface-optional | RS 232, Enternet |
| Power Supply | 230 VAC single phase, 50 HZ, 450 VA |
| &Temperature Range | 5° C - 50° C |
| Pressurized Air | 4.5 - 6 Bar |
| MOC | MS painted / SS |
| Weighing Device | Load Cell |
| Rejection type | Pneumatic Pusher. However, other types as per application requirement. |
